More photos

More photos

FAP 1118 BS/AV 4t,4h4

 A Wheel base 3600

B Vehicle length 6410

C Front overhang 1340

D Rear overhang 1470

K Minimum height from the ground to front axle 285

L Minimum height from the ground to rear axle 285

M Max. vehicle width 2500

N Rear overhang width 2500

O Front track 1990

P Rear track 2130

Height above the cab* 3230

Height above the cargo body* 3175

VEHICLE PERFORMANCE

Maximum speed 80 km/h

Maximum gradient for vehicle without trailer 11t 60 %

Minimum turning diameter 17 m

WEIGTH [kg]

Empty vehicle with cargo body and tarpaulin 7400

Payload 4000

Front axle load 5200

Rear axle load 5800

Permissible gross weight on road/off road 11400

Permissible gross trailer weight 28000

 ENGINE

Engine type OM 904LA EURO3

No. of cylinders/arrangement 4/in line

Cylinder bore/Piston stroke 102/130 mm

Total displacement 4.250 dm3

Engine power 130 kW(174 HP)

Engine RPM at maximum power 2200 min-1

Maximum torque 675 Nm

RPM at maximum torque 12001600 min-1

Engine staring at low temperatures Cold start device up to -300C

(glow plugs)

CLUTCH

Clutch type GF 395, single dry plate

Clutch activation mechanical - hydraulic

GEARBOX

Gearbox type FAP/FAMOS 6MS - 80

Gear ratio 9/5.18/3.14/2.08/1,44/1.00

Reverse gear 8.45

TRANSFER CASE

Transfer case type VG 750 STEYR

Gear ratio (on road/off road) 1.0/2.0

AXLES

Front axle (rigid pressed, with differential lock) AL3/1DS-6

Rear axle (rigid pressed, with differential lock) FAP NG10

Ratio (single reduction gear ) 5.714

SUSPENSION SYSTEM

Front steel leaf springs with additional rubber springs, hydraulic telescopic shock absorbers and torque bar

Rear steel, with leaf springs and additional rubber springs, hydraulic telescopic shock absorbers and torque bar stabilizers

BRAKES

Service brake Pneumatic, 2-line, dual circuit with direct action on all wheels

(with brake pressure control ARSK-ALB at the rear axle)

Auxiliary- parking brake spring loaded accumulators on rear wheels (with pneumatic activation of TRISTOP cylinders)w

Engine Butterfly fitted on the exhaust manifold pneumatically operated

Front axle brake lining 410x160x18

Rear axle brake lining 410x160x18

Additional equipment ABS/ASR WABCO

FRAME

Description

Rectangular frame comprising of two

pressed longitudinal members (U-cross

section) reinforced with pressed U

members bolted and riveted to the pressed

 STEERING SYSTEM

Steering type PPT/ZF 5042, hydraulic power assisted

Drive arrangement Left had drive

Optional Right hand drive

Steering wheel diameter 550 mm

COOLING SYSTEM

Description with forced circulation of cooling liquid with thermal regulation

Radiator type Tubular, laminar

Thermostat Opens at 83C

LUBRICATING SYSTEM

Description Forced feed lubrication

AIR INTAKE SYSTEM

Description Dry air filter, located behind the cabin

EXAUST SYSTEM

Description with exhaust pipes and muffler

Muffler tubular, multi-chamber, reactive

FUEL SUPPLY

Fuel tank 200 l

Fuel EURO DIZEL

WINCH

Winch type SEPSON H100PS

Rope length 60 m

Max. pulling force 70 kN

CAB

Cab type short, tilting, made according to MB licence

Support at the front with two rotating bearings with rubber bushings, and at the rear with two spiral springs with two hydraulic shock absorbers

Heating Water heating with forced circulation of water from the engine cooling system

Heater capacity 347000 kJ/h

Cab tilting Cab is tilted forward by means of hydraulic pump up to the angle of 70

Seats hydraulically adjustable seats in height and position

Windshield washing by electrical pump and nozzles

Cab instruments Tachograph, tachometer and instrument cluster. The instrument cluster includes double oil pressure gauge, coolant temperature gauge, oil pressure gauge, fuel level indicator and indicator of low pressure in the braking system